Polyurethane Sealant for The Windscreen (RENZ10)
Basic Info
Model No.: RENZ10
Product Description
Model NO.: RENZ10 Morphology: Paste Material: PU Main Agent Composition: Natural Polymer Promoter Composition: Curing Agent Color: Black Trademark: pustar Origin: Dongguan, China Bonding Function: Instant Adhesive Application: Windshield and Side Glass Sealingof Cars, Buses Classification: Room Curing Characteristic: Waterproof Composition: Organic Material 20PCS/CTN: Two Cartons Into Big CTN Specification: 310ml cartridge 600ml HS Code: 3506100090
1. TECHNICAL DATA SHEET:
Note:
All data above ware tested under standardized condition.
All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
Storage condition has a direct impact to the products' shelf life, Please refer to the instruction for special items' storing.
2. DESCRIPTION:
RENZ 20 is one component high quality multi-purpose Polyurethane Sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, RENZ 20 is manufactured in accordance with the ISO/TS 16949:2002.
3. USES:
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
* 310ml cartridge, 20 pcs/carton
* 600ml/400ml sausage, 20 pcs/carton
6. APPLICATION:
Minimum application temperature: 5°C.
RENZ 20 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply RENZ 20 in a continuous bead using enough pressure to properly apply the sealant.
7. ADVANTAGES:
* One-component formulation, excellent smooth appearance.
* Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
* Modest Hardness and high tensile strength after curing .-
* Flexible, durable and excellent extrudability.
* Need no primer to glass
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing and adhesion performance, excellent water and aging resistance.
8. ADVICE:
* For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
* Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
* This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.
Contact us if you need more details on Adhesives. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sealant、Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.
1. TECHNICAL DATA SHEET:
Testing Items | Performance |
Appearance | Black homogeneous paste |
Density (g/cm³) | 1.35±0.05 |
Sagging properties(mm) | 0 |
Shore A hardness(A°) | 63±3 |
Tensile strength( Mpa) | ≥6.5 |
Elongation at break (%) | ≥400 |
Volatile content (%) | ≤4 |
Tensile-shear strength(MPa) | ≥3.5 |
Touch Dry time (min) | 10~30 |
Curing speed(mm/d) | 3-5 |
Extrudability (ml/min) | ≥80 |
Pollution | Non |
Application temperature (ºC) | +5~+35 |
Shelf life(month) | 9 |
Note:
All data above ware tested under standardized condition.
All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.
Storage condition has a direct impact to the products' shelf life, Please refer to the instruction for special items' storing.
2. DESCRIPTION:
RENZ 20 is one component high quality multi-purpose Polyurethane Sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, RENZ 20 is manufactured in accordance with the ISO/TS 16949:2002.
3. USES:
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
4. ClEANING:
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.
5. PACKAGING:
* 310ml cartridge, 20 pcs/carton
* 600ml/400ml sausage, 20 pcs/carton
6. APPLICATION:
Minimum application temperature: 5°C.
RENZ 20 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply RENZ 20 in a continuous bead using enough pressure to properly apply the sealant.
7. ADVANTAGES:
* One-component formulation, excellent smooth appearance.
* Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
* Modest Hardness and high tensile strength after curing .-
* Flexible, durable and excellent extrudability.
* Need no primer to glass
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing and adhesion performance, excellent water and aging resistance.
8. ADVICE:
* For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
* Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
* This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
9. PRIMING:
Activators and/or primers is not required.
Contact us if you need more details on Adhesives. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sealant、Silicone Sealant. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : PU Auto Glass Sealant
Premium Related Products
Other Products
Hot Products
Dust Cleaner SpraySilicone Oil Spray Mould-Releasing SprayAll Season Aerosol Can PU Foam Sealant (JOT66)PU Sealant for Wood FloorPU Sealant for Wood FloorPU Waterproof Coating (JOT66)Nonn Benzene Glue Contact Adhesive Sbs TypeAerosol Hammer Finish Spray Paint for CoatingHeat Resistant Spray Paint/High Temperature Spray PaintHarmless Colour Spray for Party FunDiamond Hard Shinny Durable WaxRadiator Coolant for Car Care (Car Wash, Car Care)Pustar PU Windscreen Sealant for Auto Glass BondingLejell220 High Modulus PU Sealant for ConstructionHigh Modulus PU Sealant for Construction (Lejell230)Hot Sale, Windshield Sealant for Automobile Repair (renz10)